Electronics & wiring – Modulauto https://www.lazer-lampe.com/en/ Official reseller of Lazerlamps Mon, 14 Jun 2021 09:29:54 +0000 en-US hourly 1 CanM8 Cannect Research & Update Interface (RUI) https://www.lazer-lampe.com/en/product/canm8-cannect-research-update-interface-rui/ Fri, 11 Jun 2021 08:24:04 +0000 http://www.lazer-lampe.com/?post_type=product&p=2790 The post CanM8 Cannect Research & Update Interface (RUI) appeared first on Modulauto.

]]> The post CanM8 Cannect Research & Update Interface (RUI) appeared first on Modulauto.

]]> RELAY-24V https://www.lazer-lampe.com/en/product/relay-24v/ Fri, 11 Jun 2021 08:09:55 +0000 http://www.lazer-lampe.com/?post_type=product&p=2787 The post RELAY-24V appeared first on Modulauto.

]]> The post RELAY-24V appeared first on Modulauto.

]]> Four Lamp ‘Carbon’ Wiring Kit (with switch) https://www.lazer-lampe.com/en/product/four-lamp-carbon-wiring-kit-with-switch/ Wed, 09 Jun 2021 10:30:22 +0000 http://www.lazer-lampe.com/?post_type=product&p=2175 The ideal solution for wiring the Lazer 4-way Rally Bonnet Pod featuring Carbon-6 LED spotlights. The wiring loom allows for additional connection of LH/RH corner pods, and compatible with Lazer’s ‘Race’ Dashboard Controller. The setup is quick, easy, and reliable with Deutsch DT06-3S connections and...

The post Four Lamp ‘Carbon’ Wiring Kit (with switch) appeared first on Modulauto.

]]> The ideal solution for wiring the Lazer 4-way Rally Bonnet Pod featuring Carbon-6 LED spotlights. The wiring loom allows for additional connection of LH/RH corner pods, and compatible with Lazer’s ‘Race’ Dashboard Controller. The setup is quick, easy, and reliable with Deutsch DT06-3S connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 35A fuse, a battery terminal at one end, and 2.5m of flex on the lamp cables. The kit comes supplied with on/off switch which can be easily substituted for the Dashboard Controller which permits additional control and functionality of the lights themselves, alongside connection to accompanying corner pod systems.

Compatible with:
Carbon-6 (Spot / Drive) / Four-Way Rally Bonnet Pod

Product Features

• Four-Lamp Wiring Kit for Carbon-6 LED spotlights
• 2.5m cable lengths
• Includes 12V relay and 35 amp fuse
• Deutsch DT06-3S connections
• Compatible with Dashboard Controller (Race version)
• Includes on/off switch for independent operation of lights
• Braided cable sections for added protection in engine bay

The post Four Lamp ‘Carbon’ Wiring Kit (with switch) appeared first on Modulauto.

]]> CANM8 Duo 10x Speed Pulse & High Beam Interface (12V and 24V Systems) – for Triple-R Smartview https://www.lazer-lampe.com/en/product/canm8-duo-10x-speed-pulse-high-beam-interface-12v-and-24v-systems-for-triple-r-smartview/ Wed, 09 Jun 2021 10:28:58 +0000 http://www.lazer-lampe.com/?post_type=product&p=2172 The CanM8 Cannect Duo (Speed Pulse & High Beam) Interface is a 2-output CAN Bus interface which provides a quick solution for detecting high beam activity on vehicles which feature CAN Bus wiring. The Cannect Duo Interface also features a square pulsed speed signal output...

The post CANM8 Duo 10x Speed Pulse & High Beam Interface (12V and 24V Systems) – for Triple-R Smartview appeared first on Modulauto.

]]> The CanM8 Cannect Duo (Speed Pulse & High Beam) Interface is a 2-output CAN Bus interface which provides a quick solution for detecting high beam activity on vehicles which feature CAN Bus wiring. The Cannect Duo Interface also features a square pulsed speed signal output from the vehicle at a frequency of 10Hz.
Designed for use with Triple-R Smartview, the Cannect Duo is required where the Speed Adapt feature is requested to operate.
Note – a different CanM8 arrangement is required for Volvo installations, where it is only possible to detect the speed signal output using a dedicated interface – CanM8 Cannect Pulse.

Key Features

• Can-Bus interface provides a quick solution for detecting high beam activity, and speed pulse
• For use with Triple-R Smartview
• Compatible with most modern vehicles excluding Volvo

The post CANM8 Duo 10x Speed Pulse & High Beam Interface (12V and 24V Systems) – for Triple-R Smartview appeared first on Modulauto.

]]> Two-Lamp Wiring Kit – with Switch (Carbon Series, 12V) https://www.lazer-lampe.com/en/product/two-lamp-wiring-kit-with-switch-carbon-series-12v/ Wed, 09 Jun 2021 10:27:36 +0000 http://www.lazer-lampe.com/?post_type=product&p=2166 The ideal solution for wiring a pair of Lazer Carbon-6 LED spotlights. The setup is quick, easy, and reliable with Deutsch DT06-3S connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 35A fuse, a battery terminal at one end, and...

The post Two-Lamp Wiring Kit – with Switch (Carbon Series, 12V) appeared first on Modulauto.

]]> The ideal solution for wiring a pair of Lazer Carbon-6 LED spotlights. The setup is quick, easy, and reliable with Deutsch DT06-3S connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 35A fuse, a battery terminal at one end, and 2m of flex on both lamp cables, and allows for the operation of Lazer products via an independent switch which can be mounted inside your vehicle.

All Carbon-6 LED spotlights are supplied with a loom and corresponding DT06-3P connectors.

Compatible with:
Carbon-6 (Spot / Drive) / Two-Way Rally Bonnet Pod

Product Features

• Two-Lamp Wiring Kit for Carbon-6 LED spotlights
• 2m cable lengths
• Includes 12V relay and 35 amp fuse
• Deutsch DT06-3S connections
• Includes on/off switch for independent operation of lights
• Braided cable sections for added protection in engine bay

The post Two-Lamp Wiring Kit – with Switch (Carbon Series, 12V) appeared first on Modulauto.

]]> Four-Lamp Wiring Kit (Low Power, 12V) with Splice https://www.lazer-lampe.com/en/product/four-lamp-wiring-kit-low-power-12v-with-splice/ Wed, 09 Jun 2021 10:26:09 +0000 http://www.lazer-lampe.com/?post_type=product&p=2161 The ideal solution for wiring four E-mark approved Lazer high performance LED spotlights, most commonly on pick-up trucks where the requirement is for 2x lights at the front of the vehicle, and 2x lights on the roof/sports bar. Only suitable where lights without additional position...

The post Four-Lamp Wiring Kit (Low Power, 12V) with Splice appeared first on Modulauto.

]]> The ideal solution for wiring four E-mark approved Lazer high performance LED spotlights, most commonly on pick-up trucks where the requirement is for 2x lights at the front of the vehicle, and 2x lights on the roof/sports bar. Only suitable where lights without additional position light function are being used. The setup is quick, easy, and reliable with 2-pin superseal connection and no configuration procedures. The kit features a 12V relay, 35A fuse, a battery terminal at one end, and 1.5m and 6.5m of flex on the lamp cables, and allows for the operation of Lazer products in parallel with the standard high beam driving lights on your vehicle.

All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Compatible with:
ST Evolution (All Products)
Triple-R 750 Elite (Gen2)
Triple-R 850 Elite (Gen2)
Triple-R 1000 Elite (Gen2)
Linear-6 (Std / Elite)
Linear-12 (Std / Elite)
Linear-18 (Std / Elite)

Product Features

• Four-Lamp Wiring Kit for Lazer E-mark approved driving lights (not with PL function)
• 1.5m / 6.5m cable lengths
• Includes 12V relay and 35 amp fuse
• 2-pin Superseal connections
• Allows for operation of lights in parallel with standard high beam lights
• Conduit cable sections for added protection within engine bay

The post Four-Lamp Wiring Kit (Low Power, 12V) with Splice appeared first on Modulauto.

]]> CanM8 Cannect Pulse (10Hz) – for Triple-R Smartview (Volvo Cars) https://www.lazer-lampe.com/en/product/canm8-cannect-pulse-10hz-for-triple-r-smartview-volvo-cars/ Wed, 09 Jun 2021 10:24:45 +0000 http://www.lazer-lampe.com/?post_type=product&p=2157 The CanM8 Cannect Duo (Speed Pulse & High Beam) Interface is a 2-output CAN Bus interface which provides a quick solution for detecting high beam activity on vehicles which feature CAN Bus wiring. The Cannect Duo Interface also features a square pulsed speed signal output...

The post CanM8 Cannect Pulse (10Hz) – for Triple-R Smartview (Volvo Cars) appeared first on Modulauto.

]]> The CanM8 Cannect Duo (Speed Pulse & High Beam) Interface is a 2-output CAN Bus interface which provides a quick solution for detecting high beam activity on vehicles which feature CAN Bus wiring. The Cannect Duo Interface also features a square pulsed speed signal output from the vehicle at a frequency of 10Hz.

Designed for use with Triple-R Smartview, the Cannect Duo is required where the Speed Adapt feature is requested to operate.

Note  – a different CanM8 arrangement is required for Volvo installations, where it is only possible to detect the speed signal output using a dedicated interface – CanM8 Cannect Pulse.

Key Features

  • Can-Bus interface provides a quick solution for detecting high beam activity, and speed pulse
  • For use with Triple-R Smartview
  • Compatible only with Volvo cars

The post CanM8 Cannect Pulse (10Hz) – for Triple-R Smartview (Volvo Cars) appeared first on Modulauto.

]]> Two-lamp wiring kit (Position light, 12V) https://www.lazer-lampe.com/en/product/two-lamp-wiring-kit-position-light-12v/ Wed, 09 Jun 2021 10:18:58 +0000 http://www.lazer-lampe.com/?post_type=product&p=2152 The ideal solution for wiring a pair of Lazer high performance LED spotlights, which also feature integrated Side/Position Light function. The setup is quick, easy, and reliable with 3-pin superseal connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 30A...

The post Two-lamp wiring kit (Position light, 12V) appeared first on Modulauto.

]]> The ideal solution for wiring a pair of Lazer high performance LED spotlights, which also feature integrated Side/Position Light function. The setup is quick, easy, and reliable with 3-pin superseal connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 30A fuse, a battery terminal at one end, and 1.2m of flex on both lamp cables, and allows for the operation of Lazer products either in parallel with the standard lighting on the vehicle, and/or via an independent switch (for high beam function) which can be mounted inside your vehicle.

All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Compatible with:

Triple-R 750 (Gen2)
Triple-R 850 (Gen2)
Triple-R 1000 (Gen2)
Triple-R 1250 (Gen2)
Linear-12 Elite (with Position Light)
Linear-18 Elite (with Position Light)

Two-Lamp Wiring Kit for Lazer products with integrated Position Light function
1.2m cable lengths
Includes 12V relay and 30 amp fuse
Superseal connections
Includes optional on/off switch for independent operation of high beam
Braided cable sections for added protection in engine bay

The post Two-lamp wiring kit (Position light, 12V) appeared first on Modulauto.

]]> Two-lamp wiring kit (Position light, 12V) With splice https://www.lazer-lampe.com/en/product/two-lamp-wiring-kit-position-light-12v-with-splice/ Wed, 09 Jun 2021 10:17:15 +0000 http://www.lazer-lampe.com/?post_type=product&p=2147 The ideal solution for wiring a pair of Lazer high performance LED spotlights, which also feature integrated Side/Position Light function. The setup is quick, easy, and reliable with 3-pin superseal connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 20A...

The post Two-lamp wiring kit (Position light, 12V) With splice appeared first on Modulauto.

]]> The ideal solution for wiring a pair of Lazer high performance LED spotlights, which also feature integrated Side/Position Light function. The setup is quick, easy, and reliable with 3-pin superseal connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 20A fuse, a battery terminal at one end, and 3m/4.5m of flex on lamp cables, and allows for the operation of Lazer products in parallel with the standard lighting on the vehicle.

All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring in to your vehicle system.

Compatible with:

Triple-R 750 (Gen2)
Triple-R 850 (Gen2)
Triple-R 1000 (Gen2)
Triple-R 1250 (Gen2)
Linear-12 Elite (with Position Light)
Linear-18 Elite (with Position Light)

Two-Lamp Wiring Kit for Lazer products with integrated Position Light function
3m+ cable lengths
Includes 12V relay and 20 amp fuse
Superseal connections
High beam trigger wire allows for operation of lights in parallel with standard high beams
Conduit cable sections for added protection in engine bay

The post Two-lamp wiring kit (Position light, 12V) With splice appeared first on Modulauto.

]]> Four-Lamp Wiring Kit (Low Power, 12V) with Switch https://www.lazer-lampe.com/en/product/four-lamp-wiring-kit-low-power-12v-with-switch/ Wed, 09 Jun 2021 10:15:37 +0000 http://www.lazer-lampe.com/?post_type=product&p=2142 The ideal solution for wiring four E-mark approved Lazer high performance LED spotlights, most commonly within motorsport applications, where lights without additional position light function are being used. The setup is quick, easy, and reliable with 2-pin superseal connection and no configuration procedures. The kit...

The post Four-Lamp Wiring Kit (Low Power, 12V) with Switch appeared first on Modulauto.

]]> The ideal solution for wiring four E-mark approved Lazer high performance LED spotlights, most commonly within motorsport applications, where lights without additional position light function are being used. The setup is quick, easy, and reliable with 2-pin superseal connection and no configuration procedures. The kit features a 12V relay, 30A fuse, a battery terminal at one end, and 2.5m of flex on the lamp cables, and allows for the operation of Lazer products via an on/off switch to be located inside your vehicle.

All Lazer lamps are sold with a pre-wired female connector attached to the male connector of the lamp harness, to facilitate wiring into your vehicle system.

Compatible with:
ST Evolution (All Products)
Triple-R 750 Elite (Gen2)
Triple-R 850 Elite (Gen2)
Triple-R 1000 Elite (Gen2)
Linear-6 (Std / Elite)
Linear-12 (Std / Elite)
Linear-18 (Std / Elite)

Product Features

• Four-Lamp Wiring Kit for Lazer E-mark approved driving lights (not with PL function)
• 2.5m cable lengths
• Includes 12V relay and 30 amp fuse
• 2-pin Superseal connections
• Allows for operation via an on/off switch

The post Four-Lamp Wiring Kit (Low Power, 12V) with Switch appeared first on Modulauto.

]]>