Carbon – Modulauto

Carbon-20 Gen 2 22540 Lumens

admin — Wed, 16 Jun 2021 10:46:56 +0000

The ultimate motorsport lighting solution. The Carbon-20 measures just under a metre in length but weighs less than 1.4kg, and with a light output from 20 high intensity LEDs that delivers 1 lux to 1062m, this really is a next generation lighting system for the most uncompromising requirements of motorsport professionals and enthusiasts.
Combined with ultra-reflective vacuum-metallised boost optics, the high intensity LEDs in the Carbon-20 produce a perfectly homogenous ‘spot’ beam pattern that can be quickly and easily tuned to individual requirements by utilising Lazer’s range of Reeded Lenses. Furthermore, through extensive testing and feedback at the very highest levels of rally, track, and off-road motorsports, the colour temperature of the LEDs has been carefully selected to provide maximum definition and sharpness. The unique design of both the housing and internal electronics, which includes rear facing LEDs, provides greater light utilisation, reduced scatter, and better distribution of light including during heavy braking and acceleration. Inverted optics for 2019 provide for improved lighting performance in fog or heavy rain conditions.
Despite the hugely impressive lighting performance, it is through ground-breaking advances in material design and engineering that the Carbon Series really stands apart from all other lighting solutions. A full carbon-fibre housing provides for an ultra-lightweight construction, and a power/weight ratio never seen before in automotive lighting. While extremely durable, Carbon Fibre doesn’t benefit from the same high conductivity of traditional aluminium LED lamps, in this regards particular care has been taken to optimise the heatsink on the underside of the lamp to maximise heat dissipation while keeping weight down and drag coefficient low.
The Carbon-20 is supplied complete with Lazer’s lightweight, quick fit and release, Universal Single Lamp Mount, as well as a fitted Neoprene Impact Cover, and comes pre-wired with Deutsch male/female connectors.

The post Carbon-20 Gen 2 22540 Lumens appeared first on Modulauto.

Carbon-6 (Spot) 6760 Lumens

admin — Wed, 16 Jun 2021 14:13:00 +0000

The Carbon-6 (Gen2.1), upgraded in 2019, is the ultimate driving light for rally and track motorsports. The light comes available with either Spot or Drive optics and thanks to an ultra-lightweight housing, the lamp weighs just 420g, but the lighting performance is staggering, with 1 lux extending out over 700m (Spot optic). The suitability of the Carbon-6 to motorsport applications is enhanced by ECE (E9) Reg 112 approval, a feature required by many race events and series.
Lighting performance is borne out of ultra-reflective vacuum-metallised boost optics, alongside a combination of the latest, most efficient, high intensity 11W LEDs and 3W Matrix LEDs, finely tuned for the specific requirements of the motorsport sector. The (premium bin) LEDs are carefully selected at 5000 kelvin to provide maximum definition and sharpness, while the unique design of both the housing and internal electronics, which includes rear facing LEDs and inverted optics, provides superior light utilisation, and long-term product reliability.
Still it is through ground-breaking advances in material design and engineering that the Carbon Series really stands apart from all other lighting solutions. New for 2019, all Carbon-6 lamps are available constructed using either a “prepreg” carbon-fibre housing, or from a 3D printed Carbon-Fibre & Nylon composite material (CF-PA12) material. Prepreg carbon-fibre benefits from exceptional strength and rigidity ensuring the lamps longevity when exposed to harsh conditions and light-moderate impact. By contrast, the 3D print CF-PA12 material, finished with an automotive-grade gloss black paint, provides for a more cost-effective solution albeit one with lower overall strength.
All Gen 2.1 Carbon-6 lamps feature capability to operate with additional functionality when used in conjunction with the Race Dashboard Controller, due to be launched in October 2019. When using the RDC, the customer will be able to operate the following modes from their Gen 2.1 Carbon-6 lamps: Fog mode, Adaptive mode (A secondary beam moves up or down depending on the braking and accelerating of the lamp), E-mark mode, E-Boost mode.
Note – 3D printed lamps are approved to IP65 only.
Ce qui est inclu:
– x1 Carbon-6 LED Lamp

The post Carbon-6 (Spot) 6760 Lumens appeared first on Modulauto.

Carbon-6 (Drive) 6760 Lumens

admin — Wed, 16 Jun 2021 14:13:32 +0000

The post Carbon-6 (Drive) 6760 Lumens appeared first on Modulauto.

Carbon-2 – Spot 2255 Lumens

admin — Wed, 16 Jun 2021 14:14:08 +0000

Weighing as little as 170g, and with a single unit capable of delivering usable light (1 lux) to 466m, the Carbon-2 is the ultimate motorsport lighting solution where space is at a premium. Available with a choice of three optics – Spot, Reeded (Horizontal) and Reeded (Vertical), the lights work either as multiple units used in combination for a personalised driving light package, or used individually as the ultimate corner lighting solution.
At its core, the lighting performance of the Carbon-2 is driven by ultra-reflective vacuum-metallised boost optics, combined with a pair of high intensity 11W LEDs. The Spot and Reeded lens options give flexibility to match the distribution of light to specific applications, with the Reeded lens option also available for lights mounted in a vertical orientation.
Lighting performance aside, it is through ground-breaking advances in material design and engineering that the Carbon Series really stands apart from all other lighting solutions. New for 2019/20, all Carbon-2 lamps are available constructed using either a “prepreg” carbon-fibre housing, or from a 3D printed Carbon-Fibre & Nylon composite material (CF-PA12). Prepreg carbon-fibre benefits from exceptional strength and rigidity ensuring the lamps longevity when exposed to harsh conditions and light-moderate impact. By contrast, the 3D print CF-PA12 material, finished with an automotive-grade gloss black paint, provides for a more cost-effective solution albeit one with lower overall strength.
Through extensive testing and feedback at the very highest levels of rally, track, and off-road motorsports, the colour temperature of the LEDs has been carefully selected to provide maximum definition and sharpness. The unique design of both the housing and internal electronics, which includes rear facing LEDs, provides greater light utilisation, reduced scatter, and a more homogenous light distribution.
Note – 3D printed lamps are approved to IP65 only.

The post Carbon-2 – Spot 2255 Lumens appeared first on Modulauto.

Carbon-2 – Reeded (Horizontal) 2255 Lumens

admin — Wed, 16 Jun 2021 07:23:40 +0000

Weighing as little as 170g, and with a single unit capable of delivering usable light (1 lux) to 466m, the Carbon-2 is the ultimate motorsport lighting solution where space is at a premium. Available with a choice of three optics – Spot, Reeded (Horizontal) and Reeded (Vertical), the lights work either as multiple units used in combination for a personalized driving light package, or used individually as the ultimate corner lighting solution.
At its core, the lighting performance of the Carbon-2 is driven by ultra-reflective vacuum-metallised boost optics, combined with a pair of high intensity 11W LEDs. The Spot and Reeded lens options give flexibility to match the distribution of light to specific applications, with the Reeded lens option also available for lights mounted in a vertical orientation.
Lighting performance aside, it is through ground-breaking advances in material design and engineering that the Carbon Series really stands apart from all other lighting solutions. New for 2019/20, all Carbon-2 lamps are available constructed using either a “prepreg” carbon-fibre housing, or from a 3D printed Carbon-Fibre & Nylon composite material (CF-PA12). Prepreg carbon-fibre benefits from exceptional strength and rigidity ensuring the lamps longevity when exposed to harsh conditions and light-moderate impact. By contrast, the 3D print CF-PA12 material, finished with an automotive-grade gloss black paint, provides for a more cost-effective solution albeit one with lower overall strength.
Through extensive testing and feedback at the very highest levels of rally, track, and off-road motorsports, the color temperature of the LEDs has been carefully selected to provide maximum definition and sharpness. The unique design of both the housing and internal electronics, which includes rear facing LEDs, provides greater light utilization, reduced scatter, and a more homogenous light distribution.
Note – 3D printed lamps are approved to IP65 only.

The post Carbon-2 – Reeded (Horizontal) 2255 Lumens appeared first on Modulauto.

Carbon-2 – Reeded (Vertical) 2255 Lumens

admin — Wed, 16 Jun 2021 10:47:28 +0000

The post Carbon-2 – Reeded (Vertical) 2255 Lumens appeared first on Modulauto.